A. 请教各位“此报价半年内有效”和模具中用到的“1出4/1出8”之类的用英语如何描述谢谢~~~
此报价半年内有效 This offer/quote is valid for six months
1出4/1出8 one mold in four units
one mold in eight units
B. 用英文怎么描述高跟鞋的款式 比如坡跟 细跟 粗跟
高跟鞋 high-heeled shoes / high-heels / heels
中跟鞋 middle-heels
低跟鞋 low-heels
坡跟鞋 wedge heel / Wedges
露趾鞋 open toe shoes
拖鞋 moccasinsor
网球鞋 tennis shoes
细跟鞋 stiletto heels
例句：
1. 工作时不得穿着高跟鞋、露趾鞋、坡跟鞋、厚跟鞋、拖鞋或网球鞋。
Do not wear high heeled or open toe shoes, wedges, platform shoes, moccasinsor or tennis shoes while working.
2. Stiletto heels could be banned from the workplace because of health
and safetyreasons, according to the Trade Union bosses.
英国工会的领导们认为，基于健康和安全方面的原因，工作场所应该禁穿细高跟鞋。
C. 模具当中经常会出现拉模现象。但拉模的英文如何描述呢（此拉模不是指拉伸模具，而是指模具质量问题）
是不是模具钢材质量没按照你公司的要求去做?
或是热处里硬度不够?
两各之间都有相关的.
D. 请高手帮忙翻译模具英文资料
1.I need two quotations for this part: A - Tooling only with molded samples (Tool must be tried out before shipping) Steel Pre hard P-20. B - Tooling and Molding proction parts.
我需要二个引文为这部分: A - 用工具加工只与被铸造的样品(工具必须被试验在运输之前) 钢前坚硬P-20 。B - 凿出的装饰和造型生产零件
2.Mold description: Gas assisted injection mold with hot runner. 2 cavity (Swingicade) mold with 3 Handles and 3 Board protectors. The Swingicade parts, each with 3 hot drops. One gas pin for each Swingicade and one gas pin for each handle. (Total of 5 gas pins) The smaller Board protector parts can be runner gated. The mold will need mold locks, guided ejector system, good cooling. Gas valves will be supplied by customer. The recommended hot manifold is Yudo or similar low cost unit.
模子描述: 气体协助了射入模子与热的赛跑者。2 个洞(Swingicade) 模子以
把柄和3 个委员会保护者。Swingicade 分开, 每个以3 热的下落。一个气体别针为各Swingicade 和一个气体别针为各把柄。(共计5 个气体别针) 更小的委员会保护者零件可能是赛跑者装门。模子意志需要模子锁, 被引导的喷射器系统, 好冷却。气体阀门将由顾客供应。被推荐的热的多头管是Yudo 或相似的低成本单位。
4.我需要凿出的装饰花费(只) 为这部分。这是气体协助的工具。它将需要二气体别针和一根热的多头管以四下落。您的工具商店或其他地方商店打制这个工具和能并且跑样品吗? (需要尝试工具在运输之前)
5.请引述以下工具: "Quik-Slide" 框架:Single 洞热的赛跑者(Yudo 多头管或相似) 气体协助了模子。热的赛跑者, 4 下落, 二供气别针, 模子锁, 被引导的喷射器, 好冷却
6.P-20 洞和核心, 材料将是高的流程HDPE 。
E. 急，在线等！描述展位的“三面开口”，用英文怎么说
The booth with 3 open sides
F. 请懂模具方面英文高手帮忙翻译--多谢
9 years work experience in plastic mould taiwan-owned enterprise. Four years of factory management experience, familiar with mould design and project management process, master proction management process, common plastic moulds, steel performance, application and design software skilled Pro/e, Moldflow (mold flow analysis), AutoCAD, using UG.
In 2001-02-2005-3 mould manufacturing (2003); the leader to start
2005-03-2007-05 mould design and project management (classes),
The 2007-05 started mould department supervisor responsibilities.
There had been engaged in before the mould processing and manufacturing mold design and engineering analysis review. And the company grow together, the mould department mainly manufacturing cell phone casing and department of Apple laptop (ipad), LCD TV shell, guide the mould, customers are in Sony Ericsson Apple NOKIA MOTOROLA SAMSUNG, DELL HP MICROSOFT in mold design, manufacture process and posterior segment, molding mould cavity, try to experience, mold cavity assessment is quite before review, another factory factory and system programming ability, familiar with computer operation of systematic factory.
Familiar with IMD, IML (imf), double shot Isertmolding IMR, Hot runner structure, structure and proficient in use of ms office software.
Main responsibilities:
1 responsible for mould department administration work, ecation, training and the overall arrangements for 8s management,
2. Responsible for mould design structure and normative documents audit, processing standards inspection audit,
3 foreign responsible for the communication with customers, design, project for the guest, achieve satisfaction,
4 internal quality management and improvement of the mould and die mold testing and validation check proct,
5 for each month guiding colleagues to work, to improve technical review and statistics report,
6 for technical requirements for regular training employees to work related aspects, communication,
7. Mould key difficulty and guide the dominant in the department employees, requirement planning schele,
8. Responsible for internal performance management system of examination, to continuously improve their projects, fair and reasonable,
9 for the environment, leading to EHS regulations and management committee members of the security council.
Responsibility: responsible for the description of mold proction management, project, and the testing team management, mould and guide the key difficulty leading in the department employee's work and required to make plans with customer's schele, communication, the processing plan of standard time, the work schele arrangement, testing and repair mode shape problem tracking and processing.
G. 怎么用英文描述做饺子
Make Dumplings
Dumpling is a traditional Chinese food. On the lunar New Year' s Day, most families make a lot of delicious mplings. To make them, follow this easy process.
The first step is to mix the flour with water. When the dough is ready, we can begin to make mpling wrappers. We use a rolling pole to roll the dough into small, thin and round pieces so that they will be easy to cook. When the wrappers are done, it' s time to prepare the filling. Usually, we use meat such as beef or mutton, and some vegetables such as cabbage or carrots for filling. You may actually choose whatever you like to put into it. We must chop those things into small pieces. Then put some salt, oil and other condiments into it and stir it evenly. When all these preparations are done, we can start making mplings. First put a spoonful of filling in the center of the wrapper. Then stick the two opposite sides together and then the rest. Don' t just cover the filling with the wrappers. The best shape of mplings is that of a ship, because when they are boiling in the pan, they look like ships sailing in the sea. The smell can make your mouth water.
饺子
饺子是一种传统的中国食品。在农历新年，大多数家庭都会包很多美味的饺子。要包饺子，请按照下列简单的程序。
第一步是用水和面。和好面之后，我们可以开始擀皮。用一根擀面杖把面团擀成又薄又小的圆形面皮，这样好煮。皮擀好之后，就该准备馅了。通常我们用肉(比如牛肉和羊肉)还有蔬菜(比如白菜和胡萝卜)作馅。你也可以用你喜欢的东西做馅。我们必须把这些东西切碎，放上一些盐，油和其他调料，然后均匀搅拌。当所有这些都弄妥后，我们就可以包饺子了。首先放一勺馅在饺子皮的中央，把两边牢牢粘住，然后把剩余的包好。不能只用皮裹住馅。饺子最好的形状是船型的，因为当它们在锅里煮的时候，看起来就像是大海里的船只。它们的香味会让你口水直流的。
H. 怎么用英文描述 穿衬衫的过程
要生动的话不是按规矩穿衣服，需要情景的嘛。对着镜子有自信的穿上，对着窗外自然的穿上
I. 这个地址用英文怎么描述。
广东省珠海市香洲区拱北国防路101号粤海国际花园19栋503室
Room 503, Building 19, Yuehai International Garden, No.101, Guofang Road, Gongbei, Xiangzhou District, Zhuhai City, Guangdong Province, China